Skip to content
HARDVANES · VANES BY BRAND

Vanes for DVP

Find the set for your DVP equipment. Compare the model, reference and dimensions before choosing.

  • By model
  • By reference
  • By dimensions
Catalogue image on a white background of a set of 4 carbon graphite vanes for vacuum pumps by HARDVANES. Replacement vanes for DVP SB 6, compatibility reference 3301018. HARDVANES reference: H29263/4; dimensions: 29 × 26 × 3 mm.
Image of a set from the catalogue. Geometry and number of pieces depend on the reference.

Everything you need to check

DVP graphite vanes for equipment in the CA, CB, CC, SA, SB and SC families. If you are looking for carbon vanes, check the material and application stated on each product page. Start with the letters and number on the nameplate; then compare the reference, dimensions and quantity on the product page. The catalogue includes sets for models such as CA 16, SB 40, CC 60/80 and SC 100/140. DVP identifies the compatible equipment; the replacement part supplied is branded HARDVANES.

To start searching by specific references, see DVP SC 100/140 · 3301021, DVP CA 16 and DVP SB 6 · 3301018. Compare the full designation on the nameplate with the replacement part's product page, the number of vanes in the set and the stated dimensions. Do not select based on an image or a partial model match: also confirm the variant, the material and the operating conditions. If the reference is missing, provide a sample or drawing so we can evaluate custom manufacturing.

Before fitting, see how to replace the vanes and avoid damage. If you need to confirm the set, send us the model and reference for a technical check.

Also find these DVP product pages by model: CB 100 / 140; SB 100 / 140; CB 60 / 80. Check the reference and dimensions of the exact set rather than choosing from the photo alone.

HARDVANES · Glossary

DVP vanes: carbon vanes, graphite vanes and vane kits

Vanes for DVP vacuum pumps are also called DVP carbon vanes, graphite vanes, rotor vanes or blades, and in Spanish paletas or aspas. Here you will find complete replacement vane sets by pump model, reference and vane dimensions, for dry running (oil-free) and oil-lubricated rotary vane pumps, compatible with the original DVP vanes.

00.20.40.60.81HARDVANESbar abs
Vacuum gauge100% of rated vacuum
00.511.522.5HARDVANESbar
Pressure gauge100% of rated pressure

HARDVANES

New vanes. Your pump, back to 100% performance.

Worn vanes give no warning: the pump keeps turning, but it no longer delivers 100%.

Worn vanes

It loses vacuum and pressure, and takes longer to do the same job.

New vanes

Factory vacuum and pressure are back: 100% performance.

Find your vanes With the cylinder, rotor and the rest of the pump in good condition.