Skip to content
HARDVANES · VANES BY BRAND

Vanes for RIETSCHLE

Find the set for your RIETSCHLE equipment. Compare the model, reference and dimensions before choosing.

  • By model
  • By reference
  • By dimensions
Catalogue image on a white background of a set of 7 carbon vanes for vacuum pumps by HARDVANES. Replacement vacuum pump vanes for HEIDELBERG 00.591.0470, compatibility references 00.591.0470 and 513431. HARDVANES reference: H85394/7; dimensions: 85 × 39 × 4 mm.
Image of a set from the catalogue. Geometry and number of pieces depend on the reference.
1 2 3 4

Everything you need to check

HARDVANES® vanes for vacuum pumps and compressors compatible with RIETSCHLE and ELMO RIETSCHLE equipment. Find your replacement part by the full model and the reference on the product page; the catalogue covers applications in the DLT, DTA, KTA, VTA, VTB, VFT and TR families, among other series. Check the variant, the dimensions of each vane, the material and the number of units per set. The same cross-reference may correspond to sets with different quantities depending on the configuration, so it is best not to choose by dimensions alone. If you are looking for graphite blades or rotor vanes for Rietschle, always start from the equipment nameplate and compare it with the data on the product page. RIETSCHLE identifies the brand of the compatible machine; the product offered is a HARDVANES® replacement part. We also evaluate custom manufacturing requirements, subject to technical assessment.

If you need a vane for an older RIETSCHLE unit or a geometry not in the catalogue, see the HARDVANES custom-made vane service. Minimum production order of 4 units, subject to technical review.

To find sets by reference number, see RIETSCHLE TR 25/26 DV · 513431, RIETSCHLE DLT 15 / DTN 15 · 513702 and RIETSCHLE TR 10 · 513455. Note the difference between the TR, DLT and DTN series and the model variants: a vane reference alone does not determine the number of units the machine needs. If you cannot find your equipment, provide the nameplate reference and its manual or a drawing of the part for technical review.

Before fitting, see how to replace the vanes and avoid damage. If you need to confirm the set, send us the model and reference for a technical check.

Other product pages by model and reference: RIETSCHLE CLFT 40 / CLFT 41 DV · 507107 · 4 vanes (190 × 27 × 4 mm) and RIETSCHLE DLT 25 / DTN 25 · 513431 · 6 vanes (85 × 39 × 4 mm). These are different sets; confirm the quantity, dimensions and equipment version before ordering.

Variant comparison: CLFT 40 / 41 DV uses reference 507107 and vanes measuring 190 × 27 × 4 mm; CLFT 60 / 61 DV · 524009 uses 200 × 34 × 4 mm. Under reference 513431, DLT 25 / DTN 25 is supplied as a set of 6 vanes and TR 25 DV / TR 26 DV as a set of 7 vanes, both measuring 85 × 39 × 4 mm. Check the number of sets required on the product page and in the manual.

HARDVANES · Glossary

RIETSCHLE vanes: carbon vanes, graphite vanes and vane kits

Vanes for RIETSCHLE vacuum pumps are also called RIETSCHLE carbon vanes, graphite vanes, rotor vanes or blades, and in Spanish paletas or aspas. Here you will find complete replacement vane sets by pump model, reference and vane dimensions, for dry running (oil-free) and oil-lubricated rotary vane pumps, compatible with the original RIETSCHLE vanes.

00.20.40.60.81HARDVANESbar abs
Vacuum gauge100% of rated vacuum
00.511.522.5HARDVANESbar
Pressure gauge100% of rated pressure

HARDVANES

New vanes. Your pump, back to 100% performance.

Worn vanes give no warning: the pump keeps turning, but it no longer delivers 100%.

Worn vanes

It loses vacuum and pressure, and takes longer to do the same job.

New vanes

Factory vacuum and pressure are back: 100% performance.

Find your vanes With the cylinder, rotor and the rest of the pump in good condition.