Skip to content
HARDVANES · VANES BY BRAND

Vanes for REPUBLIC

Find the set for your REPUBLIC equipment. Compare the model, reference and dimensions before choosing.

  • By model
  • By reference
  • By dimensions
BECKER DT 3.10 / DT 4.10 and BUSCH SV / SD 1010 B vanes. Catalogue illustration of the HARDVANES H55273/7 set of 7 carbon graphite vanes measuring 55 × 27 × 3 mm. This image is used in the BECKER listings, references 901327, 90132700007 and WN 124-003, and the BUSCH listing, reference 0722000242. Check the model, reference and quantity in the relevant product listing.
Image of a set from the catalogue. Geometry and number of pieces depend on the reference.

Everything you need to check

HARDVANES® vanes for vacuum pumps and compressors compatible with REPUBLIC equipment in the DRT, DVT and VRT series. Look up each replacement part by the full machine designation and the corresponding reference, without leaving out any letters or numbers of the variant. Check the dimensions and the number of vanes supplied in the set before confirming your order.

When servicing REPUBLIC equipment, compare the removed part with the product page and, where possible, with the manufacturer's parts list. Similar dimensions do not guarantee equivalence between versions or the suitability of a different material. REPUBLIC is mentioned solely to identify compatible equipment; the vanes sold are HARDVANES®. If the reference you need is not listed, you can use our custom-made special vane manufacturing service, providing a sample, photo or drawing.

Among the available references for REPUBLIC, you can view: Carbon vanes Republic DVT-3100 · 5310006 · 7 vanes and Carbon vanes Republic DRT-410 / VRT-410 · 5310000 · 7 vanes. The set composition depends on the exact model.

Before fitting, see how to replace the vanes and avoid damage. If you need to confirm the set, send us the model and reference for a technical check.

For REPUBLIC, the number of pieces varies between some families. Compare the sets: DRT-3100 / VRT-3100 · 5310006 · 4 vanes; DVT-3060 / DVT-3080 · 5310004 · 7 vanes; DRT-3060 / DRT-3080 / VRT-3060 / VRT-3080 · 5310004 · 4 vanes. Even if several variants share a cross-reference, always confirm the quantity for the installed model.

00.20.40.60.81HARDVANESbar abs
Vacuum gauge100% of rated vacuum
00.511.522.5HARDVANESbar
Pressure gauge100% of rated pressure

HARDVANES

New vanes. Your pump, back to 100% performance.

Worn vanes give no warning: the pump keeps turning, but it no longer delivers 100%.

Worn vanes

It loses vacuum and pressure, and takes longer to do the same job.

New vanes

Factory vacuum and pressure are back: 100% performance.

Find your vanes With the cylinder, rotor and the rest of the pump in good condition.