Skip to content
HARDVANES · VANES BY BRAND

Vanes for SCHMALZ

Find the set for your SCHMALZ equipment. Compare the model, reference and dimensions before choosing.

  • By model
  • By reference
  • By dimensions
Catalog image of the HARDVANES H55273/7 set, 7 carbon vanes for vacuum pumps of 55 × 27 × 3 mm. Replacement vanes for BECKER DT 3.10 / DT 4.10, references 901327, 90132700007 and WN 124-003, and for BUSCH SV / SD 1010 B, reference 0722000242. The image is used in the data sheets for both brands; check the model, reference and quantity in the corresponding data sheet.
Image of a set from the catalogue. Geometry and number of pieces depend on the reference.

Everything you need to check

HARDVANES® vanes for SCHMALZ EVE-TR and EVE-TR-X vacuum pumps. Check the model, dimensions and set quantity before ordering your replacement part.

Go directly to the product pages Carbon vanes Schmalz EVE-TR-360 · 5 vanes and Carbon vanes Schmalz EVE-TR-X-140 · 4 vanes. Before selecting a vane, check the exact pump version.

The EVE-TR and EVE-TR-X families should not be treated as equivalent just because the vanes look similar. Identify the full pump variant, compare the dimensions and check the number of units in the set against the maintenance documentation. You can also see SCHMALZ EVE-TR-X-40 · 7 vanes. The reference and material must be confirmed for the specific application before fitting.

Before fitting, see how to replace the vanes and avoid damage. If you need to confirm the set, send us the model and reference for a technical check.

More SCHMALZ models, distinguishing between EVE-TR and EVE-TR-X: EVE-TR-10 · 7 vanes; EVE-TR-100 · 4 vanes; EVE-TR-X-16 · 7 vanes. Do not confuse the X variant with the conventional one: check the full pump model.

HARDVANES · Glossary

SCHMALZ vanes: carbon vanes, graphite vanes and vane kits

Vanes for SCHMALZ vacuum pumps are also called SCHMALZ carbon vanes, graphite vanes, rotor vanes or blades, and in Spanish paletas or aspas. Here you will find complete replacement vane sets by pump model, reference and vane dimensions, for dry running (oil-free) and oil-lubricated rotary vane pumps, compatible with the original SCHMALZ vanes.

00.20.40.60.81HARDVANESbar abs
Vacuum gauge100% of rated vacuum
00.511.522.5HARDVANESbar
Pressure gauge100% of rated pressure

HARDVANES

New vanes. Your pump, back to 100% performance.

Worn vanes give no warning: the pump keeps turning, but it no longer delivers 100%.

Worn vanes

It loses vacuum and pressure, and takes longer to do the same job.

New vanes

Factory vacuum and pressure are back: 100% performance.

Find your vanes With the cylinder, rotor and the rest of the pump in good condition.